Definition of Reinforcing Bar

Reinforcing Bar

See Rebar

Barge

A horizontal beam rafter that supports shorter rafters.

Barge Board

A decorative board covering the projecting rafter (fly rafter) of the gable end. At the cornice, this member is a fascia board.

Barrel Vault

A vaulted ceiling of semi-circular shape, creating a dome-like appearance.

Polyethylene Vapor Barrier

Plastic film used to prevent moisture from passing through unfaced insulation. Both 4- and 6-mil polyethylene are preferred because they are less likely to be damaged during construction.

Radiant Barrier

A radiant barrier is a reflective surface, on or near a building component, that intercepts the flow of radiant energy to and from the building component.

Radiant Barrier System

A Radiant barrier System (RBS) is a building section that includes a radiant barrier facing an air space.

Rebar

Ribbed steel bars installed in foundation concrete walls, footers, and poured in place concrete structures designed to strengthen concrete. Comes in various thickness' and strength grade.

Z-Bar Flashing

Bent, galvanized metal flashing that is installed above a horizontal trim board of an exterior window, door, or brick run. It prevents water from getting behind the trim/brick and into the home.

Baseboard

Any board or molding found at the bottom of an interior wall.

Board Foot

Measurement of lumber that is the equivalent of 144 cubic inches.

Particle Board

Plywood substitute made of course sawdust that is mixed with resin and pressed into sheets. Used for closet shelving, floor underlayment, stair treads, etc.

Ridge Board

A horizontal board that serves as the apex of the roof structure.

Wafer Board

A manufactured wood panel made out of 1"- 2" wood chips and glue. Often used as a substitute for plywood in the exterior wall and roof sheathing.

Cash Surrender Value

this is the amount available to the owner of a life insurance policy upon voluntary termination of the policy before it becomes payable by the death of the life insured. this does not apply to term insurance but only to those policies which have reduced paid up values and cash surrender values. A cash surrender in lieu of death benefit usually has tax implications.

Dividend

As the term dividend relates to a corporation's earnings, a dividend is an amount paid per share from a corporation's after tax profits. Depending on the type of share, it may or may not have the right to earn any dividends and corporations may reduce or even suspend dividend payments if they are not doing well. Some dividends are paid in the form of additional shares of the corporation. Dividends paid by Canadian corporations qualify for the dividend tax credit and are taxed at lower rates than other income.
As the term dividend relates to a life insurance policy, it means that if that policy is "participating", the policy owner is entitled to participate in an equitable distribution of the surplus earnings of the insurance company which issued the policy. Surpluses arise primarily from three sources:
1) the difference between anticipated and actual operating expenses,
2) the difference between anticipated and actual claims experience, and
3) interest earned on investments over and above the rate required to maintain policy reserves. Having regard to the source of the surplus, the "dividend" so paid can be considered, in part at least, as a refund of part of the premium paid by the policy owner.
Life insurance policy owners of participating policies usually have four and sometimes five dividend options from which to choose:
1) take the dividend in cash,
2) apply the dividend to reduce current premiums,
3) leave the dividends on deposit with the insurance company to accumulate at interest like a savings plan,
4) use the dividends to purchase paid-up whole life insurance to mature at the same time as the original policy,
5) use the dividends to purchase one year term insurance equal to the guaranteed cash value at the end of the policy year, with any portion of the dividend not required for this purpose being applied under one of the other dividend options.
NOTE: It is suggested here that if you have a participating whole life policy and at the time of purchase received a "dividend projection" of incredible future savings, ask for a current projection. Life insurance company's surpluses are not what they used to be.

Endowment

Life insurance payable to the policyholder, if living on the maturity date stated in the policy, or to a beneficiary if the insured dies before that date. For example, some Term to age 100 policies offer the option of taking the face amount of the policy as a cash payout at age 100 if the policyholder is still alive and paying all required income taxes on the amount received or leaving the policy to pay out upon death whereupon the payout is tax free.

Independent Broker

this is a provincial government licensed independent businessperson who usually represents five or more life insurance companies in a sales and service capacity and who is paid a commission by those life insurance companies for sales and service of life insurance products. We for example, have been in business for 12 years and regularly place new business with over twenty different life insurance companies.

Accidental Death and Dismemberment

Coverage that provides a lump-sum payment to you or your survivors if an accident results in the loss of a limb, paralysis or your death.

Accidental Dismemberment: (Credit Insurance)

Provides additional financial security should an insured person be dismembered or lose the use of a limb as the result of an accident.

Cash Surrender Value

Benefit that entitles a policy owner to an amount of money upon cancellation of a policy.

Dividend

Unlike dividends which are paid to company shareholders, participating insurance policy dividends are not based on the company's overall profits. Rather, they are determined by grouping policies by type and country of issue and looking at how each class contributes to the company's earnings and surplus.

Dividend Policy

this policy governs Canada Life's actions regarding distribution of dividends to policyholders. It's goal is to achieve a dividend distribution that is equitable and timely, and which gives full recognition of the need to ensure the ongoing solidity of the company. It also specifies that distribution to individual policyholders must be equitable between dividend classes and policyholder generations, and among policyholders within any class.

Lender (Credit Insurance)

Individual or firm that extends money to a borrower with the expectation of being repaid, usually with interest. Lenders create debt in the form of loans. Lenders include financial institutions, leasing companies government lending agencies and automobile dealers.

Surrender

Give up certain rights under a policy, or give up the policy itself.

Surrender Charge

Expense charges applied when the owner of a policy surrenders a policy for its cash value.

Blended Payments

Payments consisting of both a principal and an interest component, paid on a regular basis (e.g. weekly, biweekly, monthly) during the term of the mortgage. The principal portion of payment increases, while the interest portion decreases over the term of the mortgage, but the total regular payment usually does not change.

Baseboard

Any board or molding found at the bottom of an interior wall.

Board Foot

Measurement of lumber that is the equivalent of 144 cubic inches.

Collar Beam

A horizontal tie beam in a roof truss that connects two opposite rafters at a level considerably above the wall plate.

Cornice

Overhang of a pitched roof, usually consisting of a fascia board, a soffit and appropriate trim moldings.

Fascia

horizontal boards attached to rafter/truss ends at the eaves and along gables. Roof drain gutters are attached to the fascia.

Gable End Wall

The triangular end of an exterior wall above the eaves formed under a gable roof.

Gable Roof

A roof that consists of two sloping planes that meet at the ridge or peak. The planes are supported at their ends by triangular, upward extensions of walls known as gables.

Gable Vent

A louver mounted in the top of the gable to allow the passage of air through the attic.

Glued Laminated Beam (Glulam)

A structural beam composed of wood laminations or lams. The lams are pressure bonded with adhesives to attain a typical thickness of 1 ½" . (It looks like 5 or more 2 X 4's are glued together).

Particle Board

Plywood substitute made of course sawdust that is mixed with resin and pressed into sheets. Used for closet shelving, floor underlayment, stair treads, etc.

Post-And-Beam

Wall construction in which beams are supported by heavy posts rather than many smaller studs.

Rafter

One of a series of beams that form the slope of a pitched roof and are analogous to floor joists.

Rebar

Ribbed steel bars installed in foundation concrete walls, footers, and poured in place concrete structures designed to strengthen concrete. Comes in various thickness' and strength grade.

Ridge Board

A horizontal board that serves as the apex of the roof structure.

Wafer Board

A manufactured wood panel made out of 1"- 2" wood chips and glue. Often used as a substitute for plywood in the exterior wall and roof sheathing.

Related to : home, mortgage, insurance, homebuyer, real estate, property, buy home, home insurance, financing, home financing, home buyer, first time homebuyer, homes, homebuying, credit, condo.